VoltMap

See the fifteen minutes that set your electricity bill.

VoltMap maps where, when and why your building uses power, warns you before a costly peak forms, and tells you exactly what to change. It starts from your utility data, with nothing to install.

One week of power demand at a cold-storage warehouse Sample data
Highest 15-minute peak
287 kW240 kW
Peak demand charge this month
$6,100$4,900

Freezers and air conditioning start together on weekday afternoons. That one overlap sets the demand charge for the whole month.VoltMap pre-cools before 2 pm and staggers the start times. Same temperatures, lower peak.

Up to half of a commercial bill isn't about how much power you use.

Demand charges are set by your single highest burst of power in the month. They often make up 30–50% of a commercial electricity bill, and the bill doesn't say what caused them.

VoltMap shows which equipment, which hour, and which change would bring the peak down.

Our example cases use conservative assumptions, starting with 8% of the bill from rate and tariff optimization. Results depend on your facility, rate plan and equipment. How annual savings are calculated

Sample bill, MaySample data
Total$18,450
Energy charges$8,23044.6%Normal
Demand charges$7,89042.8%High
Fixed and other$2,33012.6%Normal

Peak recorded: 287 kW, Tuesday at 3:15 pm. At 240 kW this bill would have been about $1,200 lower.

From a bill you can't explain to a plan you can approve.

  1. Connect your utility data

    Sign in to your utility account or upload past bills. VoltMap reads up to 24 months of history. No sensors and no site visit.

  2. Get your energy map

    VoltMap builds a digital twin of your facility: a model of how it uses power by hour, by day and by type of equipment. First findings arrive within minutes.

  3. Hear about peaks before they happen

    When tomorrow's forecast shows a costly peak, you get an alert the day before, with a plan ready.

  4. Approve the fix

    Every recommendation comes with the reason and the expected saving. Approve it in one tap, or let VoltMap handle the low-risk ones you've pre-approved.

Four tools, one picture of your building.

VoltScan

Reads your bills and meter data

Connects to your utility account, or reads uploaded PDF bills and spreadsheets. It checks every bill line against your history, flags likely billing errors, and tests whether another rate plan would cost less.

VoltMap

Shows where the money goes

A heat map of demand by hour and day, a breakdown by type of equipment, and a comparison with similar facilities. For chains, every location on one screen.

VoltOptimize

Plans the lower-cost schedule

Pre-cooling before peak hours, staggered equipment starts, schedule rules you set without code, and a check for demand response programs that pay you to reduce load.

VoltAssist

Answers in plain language & automation integration

Ask why this month's bill went up and get the day, the hour and the equipment. VoltAssist also watches in the background and tells you when something needs attention. It also connects to your other automation agents through MCP and APIs.

Equipment health alerts

A compressor that is wearing out shows up in your power data first. When a system draws 15% more than its weather-adjusted normal for three days or more, VoltMap tells you the likely cause and what to check. No sensors required.

Refrigeration power, last 30 daysSample data
Normal range23% above normal

It investigates before it interrupts you.

Most energy software raises an alarm and leaves the detective work to you. VoltAssist checks the meter data, the equipment schedules and the weather first, then arrives with the cause, the fix and the saving.

Example message from VoltAssist

Your demand charge is tracking 18% above normal this week. Walk-in Freezer 3 and HVAC Unit 2 start within the same two minutes every weekday at 2:15 pm, adding 41 kW to your peak. Staggering them by 8 minutes should remove about $310 a month in demand charges, with no effect on either system. Apply this going forward, or review it first?

Show how it reached this
  1. Checked equipment schedules: both units are set to start at 2:15 pm.
  2. Checked 15-minute meter data: a 41 kW jump at 2:15 to 2:17 pm, every weekday since Monday.
  3. Checked weather history: no heat spike that would explain it.
  4. Conclusion: simultaneous start. Confidence 92%.

You decide how much it does on its own.

Trust is earned in steps. Every account starts with advice only, and moves up when you say so.

  1. Level 0

    Advise only

    VoltMap investigates and explains. It changes nothing.

    Available now
  2. Level 1

    Small, reversible changes

    Approve a category once, such as staggering start times. VoltMap handles each instance.

    Available now
  3. Level 2

    Pre-cooling and load shifting

    Opens after you've seen the strategy work at your site.

    Coming later
  4. Level 3

    Demand response on your behalf

    For accounts with six months or more of proven results.

    Coming later

Safety limits are fixed

The temperature ranges and comfort limits you set are enforced in code. VoltMap cannot override them, at any level.

Nothing happens silently

Every action is logged with what VoltMap saw, what it checked and why it acted. You can review any of it at any time.

Built first for buildings where cooling and machines drive the bill.

  • Restaurant groups, gyms, spas, medical and dental clinics, and multi-tenant properties. Many small sites, one finance team, and a stack of utility bills every month. VoltMap reads them all, checks them, and for properties prepares the tenant re-billing.

    See the example case
    Level 0Software only: VoltScan and VoltAssist. Nothing installed, nothing controlled.
  • Refrigeration and air conditioning across tens or hundreds of stores. Compare every location, find the outliers, and catch the display case that never switched to its night setting.

    See the example case
    Level 0–1Advice, plus small reversible changes you approve once.
  • Refrigeration can account for 40–55% of the bill. Pre-cooling uses the cold already stored in your product to coast through peak hours, with temperature limits enforced and logged for FDA and USDA records.

    See the example case
    Level 0–2Advice and staggered starts today. Automated pre-cooling opens at Level 2.
  • Presses, dryers and air conditioning all start with the shift. Stagger warm-up and shift-change loads without touching production.

    See the example case
    Level 0–2Advice and approved changes today. Automated load shifting opens at Level 2.
  • Conveyors, lighting and EV charging tend to peak together. VoltMap schedules them so they don't.

    See the example case
    Level 0–3Advice and approved changes today. Automated load shifting and demand response open at Levels 2 and 3.
  • Hotels and resorts, fitness and recreation centers, senior living and care communities, express car washes and central laundries. Long hours, guests who expect comfort, and equipment that runs whether or not anyone is there.

    See the example case
    Level 0–3Advice and approved changes today. Automated load shifting and demand response open at Levels 2 and 3.

Partners: add utility bills and savings to the service you already deliver.

The Level 0 service is software only, with nothing to install on site. That makes it easy to bundle into an accounting practice, an ERP or bookkeeping service, or an automation platform.

  1. Utility portalsBills and meter data for every client location
  2. VoltScan and VoltAssistLevel 0: every bill read, checked and standardized
  3. Your firm or platformAccounting and CPA firms, bookkeeping services, chain ERP providers, automation agents
  4. Client businessesOwners and operators of 10 to 30 locations

Clients who choose the audit pay from a share of verified savings, so there is nothing for you to sell up front.

For outsourced accounting and CPA firms

No more signing in to dozens of utility portals every month to download PDFs. VoltScan collects each bill for each client location and exports standardized entries to QuickBooks, NetSuite or Sage Intacct. Collection and export come at little or no cost to accounting partners.

For the businesses you serve

Once the bills are flowing, an audit is one step away. Clients who want it get billing-error checks, a rate-plan review and savings recommendations, paid from a share of what is actually saved.

For automation and agent platforms

VoltAssist is reachable through MCP and standard APIs. Your own automation agents can ask it for bills, anomalies and recommendations, and act on the answers inside your workflow.

Connects to QuickBooks NetSuite Sage Intacct MCP REST API

What you get depends on what you're responsible for.

If you own the business or the budget

  • One clear number: what you spent on peaks last year, and how much of it is recoverable.
  • No hardware and no IT project to get started.
  • Pay from a share of verified savings with nothing upfront, or choose a fixed monthly plan.
  • A monthly summary you can read in two minutes.

If you run the facility

  • A day's warning before a costly peak, with the plan attached.
  • Explanations you can take upstairs: which equipment, which hour, how much.
  • An early signal when equipment starts drawing more power than it should.
  • Weekly reports and temperature logs prepared for you.

Pricing

Or choose a fixed monthly plan

Starter

$99 / month

One small facility, up to $100K a year in electricity

  • 1 facility
  • Level 0: software only
  • Bill upload and analysis
  • Bill category breakdown
  • Demand charge analysis
  • Email alerts
  • VoltAssist Basic
  • Monthly savings report

Professional

$599 / month

One mid-size facility, up to $1M a year in electricity

  • 1 facility
  • Automatic utility sync
  • Pre-cooling and load scheduling
  • Demand response program support
  • Unlimited schedule rules
  • VoltAssist Advanced
  • Email and text alerts
  • Weekly and monthly reports
  • Priority support

Business

$299 / location / month

Three or more locations

  • Everything in Professional
  • Portfolio dashboard
  • Location-by-location benchmarking
  • One consolidated invoice
  • Dedicated success manager
  • Quarterly business review

Enterprise

from $2,000 / month

Large portfolios and custom needs

  • Everything in Business
  • Unlimited locations
  • Building management system integration
  • Sensor package included
  • Physics-based digital twin
  • 99.9% uptime commitment
  • Implementation engineer
  • Annual third-party savings audit

Your data stays yours.

Encrypted
AES-256 in storage and TLS 1.3 in transit.
Authorized by you
You grant utility access through the Green Button standard and keep full ownership of your utility accounts.
Access by role
Separate permissions for administrators, energy managers and viewers.
Deleted when you leave
Your data is removed within 30 days of ending the contract.

VoltMap runs on Enerfy's digital twin engine, proven in large industrial parks and city-scale energy systems in Asia.

Questions

Do we need to install anything?

No. VoltMap starts from the interval data your utility already records, or from uploaded bills. Sensors and a connection to your building management system are optional and make the model more precise.

Will it change equipment settings without asking?

Not unless you allow it. Every account starts in advise-only mode. You choose which kinds of action VoltMap may take on its own, and you can change that at any time.

How does pre-cooling keep product safe?

You set the allowed temperature range. If a room approaches the limit while compressors are resting, they restart automatically. Every excursion is logged and reported.

How are savings measured?

Against a baseline of what the bill would have been without VoltMap's actions, then confirmed on your actual utility bills. Only those verified bill savings count toward the savings share. Enterprise customers can add an annual third-party audit.

Which utilities do you work with?

VoltMap connects to most major U.S. utilities through the Green Button standard. If yours isn't supported yet, upload PDF bills or a spreadsheet instead.

How soon will we see something useful?

First findings arrive within minutes of connecting your data. Equipment health alerts begin once VoltMap has 30 days of history.

Find out what your peaks cost.

Send a few details and we'll walk you through VoltMap on a facility like yours.

hello@voltmap.ai