Hotels and commercial facilities: comfort where people are, savings where they aren't.
These buildings run long hours for guests, members and residents. The savings come from the rooms, zones and machines that keep running when nobody needs them.
- Hotels, resorts and motel groups
- Fitness, sports and recreation centers
- Senior living and care communities
- Express car washes and central laundries
Example case
Modeled exampleA 180-room hotel spending $420,000 a year. Air conditioning serves empty floors at the same setting as full ones, and the laundry runs its heaviest loads in the most expensive hours of the day.
- Annual electricity cost
- $420,000
- Locations
- 1
- Demand charges, share of bill
- 32%
- Service level
- Level 0–3
- Pricing model
- Savings share: 25% of direct utility savings, nothing upfront
| Annual Gross Value Delivered | $54,894 |
|---|---|
| Direct utility savings | $50,064 |
| Operational and AP value | $4,830 |
| Less: platform fee, 25% of direct utility savings$0 upfront. Operational and AP value is included free. | −$12,516 |
| Annual Net Value to Client | $42,378 |
| Year one | Each following year | |
|---|---|---|
| Annual Gross Value Delivered | $54,894 | $46,494 |
| Less: platform fee | −$12,516 | −$10,416 |
| Annual Net Value to Client | $42,378 | $36,078 |
The audit refund is counted once, in year one. The other items continue for as long as the service runs.
- Direct utility savings: counted in the savings share
- Operational and AP value: included free
Assumptions: Rate and tariff optimization: 8% of annual electricity cost; Historical bill audit refund, one-time: 2% of annual electricity cost, year one only; Peak and load optimization: 6% of demand charges; AP labor hours saved: 1.5 hours per location per month at $35 an hour; Late fees and usage spikes avoided: 1% of annual electricity cost
This is a modeled example, not a customer result. It uses the conservative default rates explained on the Annual savings page. Actual figures are confirmed on your own utility bills. How annual savings are calculated
What VoltMap does here
- Matches air conditioning schedules to occupancy by floor and zone, within comfort limits you set.
- Moves laundry, pool heating and water heating out of the most expensive hours.
- Compares properties across a group and flags the ones drifting above the others.
How it is put in place
- Day 1
Connect
Authorize access to your utility accounts or upload 12 to 24 months of bills. Nothing is installed on site.
- Week 1
Baseline
VoltMap audits the bill history, builds a weather-adjusted baseline, and sends a savings opportunity report for your review.
- Weeks 2 to 4
First actions
Unoccupied-zone settings and laundry timing are agreed with the general manager and applied for a trial month. Guest and resident areas keep their comfort limits throughout.
- From day 30
Watch
Every new bill is collected and checked. Peak alerts arrive a day ahead, and equipment health alerts begin once 30 days of history are in place.
- Every month
Verify and settle
A statement compares each bill with the baseline. The platform fee is billed only on savings that have been verified.
How results are measured
- A baseline first
- Twelve to 24 months of your own history, adjusted for weather and operating hours, sets what the bill would have been.
- Verified on real bills
- Savings are confirmed on the utility bill itself: the rate applied, peak kW and kWh, line by line.
- Only bill savings are shared
- The platform fee applies to verified reductions and refunds on the utility bill. Hours saved and late fees avoided are reported but never billed.
- Reported every month
- One statement shows gross value, the fee and your net value. Enterprise customers can add an annual third-party audit.
Tracked for this sector: kWh per occupied room (or per member visit, resident or wash), peak kW, comfort complaints and monthly demand charge.
See the numbers for your own sites.
Send three months of bills from up to three locations. We'll show what was overpaid and why, using your own figures.